|
| Eide Ultra Ata-100 Raid Lp-pci Dual Channel Controller |
| Category: Hardware |
Date: 05-09-2005 |
MODEL- LP-RE4A11 VENDOR- SIIG INC FEATURES- Low Profile UltraATA 100 RAID Dual Channel Ultra ATA/100 RAID controller with 40-pin-80-wire Ultra ATA/100 cable. A new PCI card form factor standard made for space constrained system designs. Conforms to UltraATA/100 specification with full backward support for Ultra ATA/66/33 EIDE/Fast ATA-2 IDE and ATAPI devices. Bus mastering reduces I/O processing load on CPU to increase the system performance. Auto-detects device type and fine tunes to the best performance for each connected IDE/ATAPI device. Achieves high-speed data transfer rates up to 100MB/sec and supports drive capacities up to 128GB. Supports RAID 0 (striping) RAID 1 (mirroring) and 0+1 (mirror+stripe). * Drive Modes: - Ultra DMA 0 1 2 3 4 5; MultiWord DMA 0 1 2; PIO 0 1 2 3 4. * Data Transfer - Up to 100MB/sec burst data transfer rates with Ultra ATA/100 drives - Bus mastering reduces I/O processing load on CPU to increase the system performance. - CRC error-checking provides data verification and achieves flawless data transfer. * Devices Support - Ultra ATA 100/66/33 and EIDE/Fast ATA-2 drives - Co-exists with on-board IDE ports and connects up to 4 IDE hard drives. * Advanced Features - Two independent Ultra ATA channels - Built-in 128 byte FIFO per ATA channel for faster data transfer - Full support of ACPI for advanced system power management * ATA software RAID features - Supports RAID 0 RAID 1 and RAID 0+1 - Supports up to four ATA Hard Disk Drives (HDD) - Supports co-existence of RAID set and Non-RAID configured HDD - Allows HDDs of different sizes to be configured in a RAID set - Functions as a regular controller when RAID set is not configured - Automatic performance tuning for each device attached - Adjustable stripe size for RAID 0 and RAID 0+1 - Supports text mode BIOS GUI - Online mirror rebuilding - System GUI monitoring utility to manage the RAID functions - RAID functions can be mixed in different RAID set - Allows a RAID set to act as a bo... |
Recommended Links:
letras-boo.com
|
|
|
