These high-performance splitters are a must anytime you have one A/V device sending video to multiple TVs. A splitter accepts the signal from an off-air antenna or cable TV feed and separates the signal to send multiple feeds to three or four TVs, depending on the model. A Diplexer is used for splitting, and then recombining, satellite and antenna signals with minimal loss. Available for dual-LNB satellite dish installations, this diplexer allows the user to combine the signals from a satellite dish and an off-air antenna or cable TV hookup, eliminating the need to run extra wiring into the home. This diplexer can also be used to separate the signals and route them to satellite receivers and the TV sets antenna inputs. The DC pass feature allows the diplexers to be used with amplified antennas that require DC power via their coax cable connection, unlike most diplexers that will not pass a DC signal. The diplexer features input/output ports to combine or separate the signals from a dual-LBN satellite dish and the signals from an off-air antenna or cable TV hookup. |